Well D2Pro installation just got that much easier, we are proud to introduce the NeoFlex D2Pro FlexPCB. Just like the Flex for D2C.Key, the NeoFlex for D2Pro will cut install times dramatically. What would have taken an hour can be done in just 20min. No more cutting wires to length, striping wires etc. This is all a thing of the past with the latest in flex install ribbons for the hottest D2C chip. Unlike the Flex for D2C`Key, the NeoFlex for D2Pro is made with a slightly thicker base and we believe is better constructed over all. If you are really not a fan of D2Pro install with wires and have already got familiar with the FlexPCB, the NeoFlex D2Pro is going to be heaven sent. Now you can install this great chip with the up most simplicity in the least amount of time.
Another new feature to the NeoFlex D2Pro FlexPCB is the fact they now included power and ground into the Flex, this was not the case with the D2C`Key model, so now no wire is needed what so ever for this install unless you want all region support, you will need to use wire for those extra 4 points as the flex does not include them. I know some might be thinking, hang on, we already use thicker wires for power and ground as a given on an install, wouldn’t running it through a track be not as solid, well take a close look at the NeoFlex photo and you can see the size of the tracks for the power and ground on the board are extremely thick, so there is no need for concern that not enough amps are being delivered. Another fact we know about wire installs is that we should always keep the wires going to IC’s as short as possible, well its safe to say that using a NeoFlex for the install is going to give you the shortest length possible for all the points going to the IC. If you’re after a super clean install that will cut D2Pro install times dramatically, the NeoFlex is your answer. Buy latest FlexPCB for D2Pro here today.
WARNING
These NeoFlex only work on the older 15-wire D2Pro's, we now only sell the 9-Wire models which this flex wont work with.
| 
