These are the Xecuter Non-Xenon Alt JTAG kit #5 that is used in conjunction with the Nand-X on Falcon, Zephyr, Opus, Jasper board types. For those not doing the wire & diode trick after you have dumped and flashed your 360’s Nand you need to leave this kit installed so the console will boot after the JTAG hack has been done. The Xecuter Non-Xenon Alt JTAG kit #5 are an alternative to using the #2 kits and solder to the underside of the 360 motherboard, they are a one piece quick solder install and seem to be the preferred kit over the #2 for professional installers for all Non-Xenon boards. With saying that these might be a little harder to install than the #2 kits, so if your soldering skills are to great stick with the #2 kit, or if you are a professional installer you might want to try this Xecuter Non-Xenon alt JTAG kit #5 out to compare it with the #2 kit.
| 
