This is the Xecuter Non-Xenon JTAG Kit #2 that is used in conjunction with the Nand-X, for those not doing the wire & diode trick after you have dumped and flashed your 360’s Nand you need to leave this kit installed so the console will boot after the JTAG hack has been done. This Xecuter Non-Xenon JTAG Kit #2 works on all Non-Xenon boards such as Falcon, Zephyr, Opus, Jasper, note there is another kit for the Non-Xenon boards called the JTAG Kit #5 and unlike this #2 kit is not part of the Nand-X product, the #5 kit is an alternative to the #2 kit and solders to the underside of the board where the JTAG Kit #2 solders to the top of the board, it’s personal preference to which you would like to use, maybe worth trying out one of each to see which you prefer.
| 
